APPLICATION

The wall should be checked before application, the negative effects of the previously applied paint or other coating should be repaired and the faulty places should be repaired. Pour the product into a bucket of the appropriate size. Then add 10 liters of water, stir for 5 or 10 minutes, then let stand for 30 min. Application thickness should be about 2 or 3 mm thick. One package covers the area between 4.5 – 5 m2 with an average thickness of 3 mm. Remember to open and ventilate windows after application. The average drying time of the product is 2 days.

1. Put 10 liters of water into the bucket.
2. Add a package of a products into the bucket
3. Mix with mixer for 5 – 10 minutes
4. Allow the product to stand for 30 minutes. And then apply it to walls with special transparent trowel.
5. A package covers an area of ​​4.5 m2 – 5 m2 with an average thickness of 3 mm.

IMPORTANT ANNOUNCEMENT

1 . Adding too much water can cause some deformations and cause the surface to be crooked, curved. Or, if you add a small amount of water, the product may be hard and dry.
2. The water should be between +10 and + 30 ° C. Especially in winter, the water temperature should not be below + 15 ° C.
3. Products are not applied at temperatures below +5 ° C.
4. Products do not apply to surfaces of laminated materials such as MDF / HDF laminate, waterproof and smooth surfaces such as glass, ceramic and plastic.
5. Products do not apply to high alkaline substrates.
6. Pay attention to the Season of the season and region. Make sure that the building walls are not damp, especially during rainy seasons. The fact that the building walls are still wet and rainfall will prolong the drying time, which will have a negative effect on the adhesion of the product.